Ci Flexo Press Machine

The machine first mount plate, pre trapping function, to be completed in advance prepress trapping in the shortest possible time.

Product Details

Ci Flexo Press Machine

Speed 200M/MIN
FS

Machine features:
1.The machine introduction & absorption of European technology / process manufacturing, supporting / full functional, has the following features:
2. After mounting the plate and registration, no longer need registration, improve yield;
3. Replacing 1 set of Plate Roller (unloaded 6pcs old roller, installed six new roller after tightening), only 20
Minute registration can be done by printing;
4. The machine first mount plate, pre trapping function, to be completed in advance prepress trapping in the shortest possible time.
5. Maximum production machine speed up 200m/min, registration accuracy ±0.15mm.
6. The overlay accuracy does not change during lifting running speed up or down.
7. When machine stop, Tension can be maintained, the substrate is not deviation shift;
8. The whole production line from the reel to put the finished product to achieve non-stop continuous production, maximize product yield;
9. With precision structural, easy operation, easy maintenance, high degree of automation and so on, only one
person can operate.


Main Technical Parameter:

1

Type:

Central Impression Flexographic Printing Machine

2

Color:

6 Color

3

Drive mode:

Gear drive

4

Drive motor:

Alternating current vector motors
Frequency converter control, closed loop control

5

Pressure adjust:

By motor (It print automatically after beforehand overprint.  
Hydraulic pressure automatic reset when starting up/halt machine,  
no need register color again, the printing pressure and register all keep the same.)

6

Color register way

Crosswidth: ±10mm  Lengthwise: ±7.5mm
Electromotion ration for quick place the plate on line,  
it with automatic central reset function.

7

Color register precision

Crosswidth: ±0.15mm Lengthwise: ±0.15mm;
The register precision has no change during the machine speed up or down

8

Big central press roller

Surface of central press roller with constant temperature:±1℃
Accuracy control: within ±1℃.

9

Feeding traction roll

Rubber compression roller, pneumatic control opening and closing

10

Ceramic anilox roller

The precision of dynamic balancing: 10g
Automatic mixing the ink when halt machine, avoid the ink dry

11

Doctor blade

Enclosed chamber doctor blade  
Closed ink tank

12

Printing cylinder up and down

Hydraulic pressure automatic positioning

13

Ink supply device

Two-way pneumatic diaphragm pump for ink cycle supply automatically,
long life diaphragm printing ink viscosity automatic tracking controller.  
Reduce ink consumption substantially, lower production cost  
Bowed roller unload and anti-wrinkle device before printing

14

Dryer between each color:

Electrical heating, transformed  into circulating air heating by  heat exchanger.  
Temperature control adopts intelligent temperature control, contactless solid-state relay, set 2 control, suit to different technology,environment production, save energy consumption, enforce PID temperature  
control and temperature control precision,±2℃
Dry box between each color has windleitung and return wind pipe.


Closed Chamber Doctor Blade

28(001)

Sample

29(001)

Inquiry