High Speed Paper Straw Cutting Machine
Brief Introduction
This Machine is suitable for producing different sizes of paper straws and very small paper tubes.
[1] It adopted with PLC controller; main motor is equipped with variable frequency speed regulation; touch screen man-machine interface. Easy for parameters setting & operating.
[2] Cutting section adopted with numerical multi-blades cutting system. Servo synchronous tracking cutting system makes it higher precision and multi-blades cutting makes it higher efficiency.
[3] Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.
[4] Multi-blades paper drinking straw making machine equipped with Numerical and Multi-blades Cutting System. This machine is specially used for producing all kinds of paper drinking straws.
[5] Synchronous cutting system controlled by servo motor -- it means the cutting part moves together with paper tube and cutting in a high precision.
[6] Adopt with MULTI CUTTERS. Winding and cutting can be finished in one time.
Main Technical Parameters
technical parameter | |
Paper layer number | 3-5 layers |
Inner diameter of coil | 4.3-12mm |
Coil thickness | 0.3-1mm |
Coil speed | 0-45 M / min |
Head | 2 heads and single belt |
Fixed axis method | flange |
Cutting system | Numerical Control (Nc) Multi knive (standard 5 knives) |
Cutting length | 120-850mm |
Synchronous tracking and cutting | Servo motor synchronous tracking cutting |
Glue way | Double sided (customizable single side) |
Fixed length | According to encoder |
Number of Operator | 1-2 |
speed control system | frequency control |
Power Parameters | 380 volts/Three-phase/50Hz |
Efficiency (production of paper straws per hour) | 12000 roots / hour |
| Machine size and weight | |
Mainframe size | 5600*1600*1750mm |
Area covered | 7000mm*6000mm*1800mm |
weight | 1200kgs |
| drive system | |
Main motor | 3KW |
Main engine speed | 1400r/min |
Hub speed | 48r/min |
Hub output strength | 1000N m |
| Control system | |
Electric machinery | Schneider |
human-computer interface | Schneider |
Frequency converter | 4KW (Schneider) |
Actuating element | Schneider |
Signal element | HuGong |
Pneumatic components | Airtac |
Electrical components | Schneider |
Bearing | Harbin |
servo motor | 1KW(Schneider) |
Moving wire rod | ABBA Taiwan |
Moving slider | ABBA Taiwan |
| Main configuration | |
Paper holder | 3 layers |
Glue holder | 3 layer spray type |
mandrel | 2 sets (size supplied by customers) |
Belt | 2 |
Belt adjustment | Manual |
gummed paper holder angle adjustment | Manual adjustment |
Paper tape lubricant supply | Automatic supply |
| Complimentary accessories | |
tool case | 1 set |
knife | 10 |
Aluminum-Profile Paper Reel Stand
Aluminum-Profile Glue Unit
Multi-knives Inline Cutting System
L type collector
