Small Paper Straw Slitting Rewinding Machine
Brief Introduction
This Machine is suitable for paper straw production, slitting and rewinding roll paper.
Main Technical Parameters
Technical Parameter | Main Configuration | ||
Unwind width | 450mm | Main Motor | 2kw |
Unwind diameter | Ф 900 mm max. | Inverter | Kewo |
Rewind diameter | Ф600 mm max. | Material loading shaft | 1 piece |
Slitting width | 13.7 mm min. | Rewinding shaft | 2 pieces |
Speed | 1-100m/min | Deviation rectifying device | 1 set |
Unwind roll clamping | by air expanding shaft | Meter counter | 1 set |
Rewind rolls clamping | by air expanding shaft | Tension control device | 1 set |
Tension control | Closed-loop tension control | Magnetic braking device | 1 set |
Meter counting | Automatic | Blades on machine | 30sets |
Deviation rectifying | by Photoelectric eye | Waste paper remove device | 1 set |
Rewinding roll | Double | Tool box | 1 set |
Voltage | 220v 3PHS 60Hz | Measurement & Weight | |
Operating person | 1 person | Measurement | 1100*1000*1350mm |
Weight | 480kgs | ||
